Sweet Artist Wafer Paper Conditioner is best used with a high-quality absorbent wafer paper such as EPS Wafer Paper Fine (0.3mm) of EPS Wafer Paper (0.35mm).

Instructions for Use:

1. Shake bottle well before use.
2. If creating petals or certain shapes, colour and cut your wafer paper before conditioning.
3. Spray a light, even mist onto the rough side of your wafer paper from a distance of around 25cm/10". Do not saturate the wafer paper by over-spraying, just slightly moisten the surface. You can add more wafer paper conditioner if required.
4. If required, use a food-safe brush or clean fingers to ensure an even-distrubution of the conditioner on the wafer paper.
5. Leave the wafer paper for a few minutes on a drying rack to soak in the conditioner and dry slightly. If sticky to touch, you can use a small amount of cornflour brushed lightly over the surface to prevent the wafer paper from sticking to your tools or itself when folding.
6. Use relevant tools such as petal/leaf veiners or sugarcraft tools to mould, sculpt, bend or shape your wafer paper to the desired finish.
7. Leave to dry and set in place.

Wafer Paper Conditioner can also be used to mix with lustre dusts or food-colurings to colour wafer paper. Decant into a smaller spray bottle or paint palet and mix with your chosen food colour or lustre dust. Spray coloured conditioner directly onto your wafer paper or use a food-safe brush to gently paint a light coverage on the surface.