Sweet Artist Magnetic Chocolate Moulds - Circular Lollipops

- Ideal for using with Sweet Artist® Chocolate Transfer Sheets
- Create your own personalised printed chocolate lollipops
- Includes Polycarbonate Mould and Magnetic Plate
- Polycarbonate mould is dishwasher safe

Moulds measure:

- Lollipop / Lollies measure 5 cm diameter x 1 cm high (depth)
- 7 lollipop / lollies per mould

Please note - lollipop sticks are not included with this product - please select from the dropdown if you would like to add some.

How to use:

• Turn the mould upside down and remove the magnetic metal base plate.
• Place the printed Sweet Artist® Chocolate Transfer Sheets with the design facing down into the mould
• Replace the magnetic metal base to seal the transfer sheet inside the mould and turn the mould back over
• Pour over melted (tempered) chocolate (white chocolate works best)
• Smooth over chocolate, removing any excess
• Tap the side of the mould or tap the mould on a hard surface to remove excess air bubbles
• Leave to set in a cool place / fridge
• To remove the chocolates/pralines turn the mould upside down and hit the mould onto a flat surface in one sharp (but not too heavy) action. Alternatively, remove the magnetic metal base and pop the chocolates out carefully.
• Congratulations - The chocolates will fall out with the design facing upwards!

• For better results, warm the mould before use with a heat gun to a few degrees lower than the tempered chocolate
• Always ensure the moulds are clean, dry and avoid getting fingerprints inside the moulds as these will transfer onto the shiny surface of the chocolates !
• To make filled (ganache) pralines / chocolates:
  • after initially filling the mould, leave for 1 minute and then empty the melted / tempered chocolate back into the bowl / temperer
  • Scrape off the excess chocolate to leave a flat / clean surface for the final sealing layer of chocolate to adhere to.
  • Chill the chocolates
  • Remove the chocolates from the fridge and fill with praline/ganache
  • Leave for a few minutes
  • Add melted / tempered chocolate to the mould and remove the excess chocolate to leave a clean and smooth base
  • Chill the chocolates
  • To remove the chocolates/pralines turn the mould upside down and hit the mould onto a flat surface in one sharp (but not too heavy) action.
  • Congratulations - The filled chocolates will fall out with the design facing upwards !

• No - Tempering chocolate is an essential step for making smooth, glossy, evenly colored coating for your dipped chocolates. Tempering prevents the dull grayish color and waxy texture that happens when the cocoa fat separates out. Tempered chocolate produces a crisp, satisfying snap when you bite into it.

• Heat it for 5 to 10 seconds at a time, stirring and checking the temperature before reheating. For dark chocolate, reheat to 88°F to 91°F. For milk and white chocolate, reheat to 87°F to 88°F. If you keep your chocolate within these temperature ranges, it will stay in temper and be liquid enough to use.

• Yes - Put the 8 ounces into the microwave and melt on high in 20 to 30 second bursts, stirring gently, until it is melted and glossy, in between 114 to 118° F. You may even need to microwave in 5-second bursts toward the end. The goal is to hit the temperature "sweet spot" and not burn or overheat the chocolate.